MGF/TF
Rover PG1 gearbox
|
|
|
|
upper fill and lower drain bolt
|
drive shaft bearing and seal
|
speedo cable location
|
side view |
|
. |
. |
|
. |
Oil filler and release screw
Tightening tensions are 45 Nm for the square 3/8 inch socket drain
plug and 35 Nm for the filler plug |
|
Halbachsen |
drive shafts |
|
. |
front gear change assy |
|
. |
front gear change assy |
|
Schaltseile |
gear linkage cables |
|
unteres Kabel |
lower gear change cable (short) |
|
Kugelgelenk |
gearbox side located rubber dampened ball joint
for a 13mm ball. Cable side with 6mm inner thread |
|
gearbox at MGR 2001 |
see
also this FWD site !! |
|
|
|
.
|
|
Castrol SMX-S
Full-Synthetic
SAE75-W-85 API GL 3/4
best option regarding advise from Castrol.
replaced by
Castrol Syntrans Multivehicle 75W-90 (data
sheet)
The Castrol TAF-X (GL4/L5) is said to work aswell..
According to an email dated 21.March 2013 from LiquiMoly,
they recommend their Oil Type 4426 / 4427 (data
sheet) for the PG1
Land Rover STC9158 (1l)
Land Rover STC9157 (5l)
Ravenol MTF-2 SAE 75W-80
|
Kupplungs-Kit
3000 607 001 · 4008470
Montagezeit (in Std.) 3.50
--------------------------
Durchmesser 215 mm
Zähnezahl 24
|
AUSRUECKER KZA-1 HONDA
product-ID: 110907 #9388042
|
|
back
or to my MGF home site www.MGFcar.de
Disclaimer
For documents and descriptions available from this server,
the Webmaster does not warrant or assume any liability or responsibility for
the accuracy, completeness, or usefulness of any information, apparatus, product,
or process disclosed.
www.mgfcar.de
does not endorse or recommend any commercial products, processes, or services.
The views and opinions of authors expressed on this Web sites do not necessarily
state or reflect those of the Webmaster, and they may not be used for advertising
or product endorsement purposes.